Membrane Filter Press for Gold Slurry Dewatering in South Africa

November 16, 2026
Mining & Metallurgy South Africa Real Cases

A client in South Africa approached us with a challenging dewatering duty: a gold slurry stream requiring both high solids recovery and cake washing to remove pregnant solution before disposal or further processing.

Process Requirements

The customer provided the following process data:

  • Feed flow rate: 5.6 m³/h
  • Solids content: 40–45% (w/w)
  • Particle size: F80 = 75 microns, D50 = 50 microns
  • Material: gold slurry
  • The filter cake needed to be washed to remove pregnant solution

In addition, the client expected the equipment to run 24 hours a day, with a preferred cycle time of 30–45 minutes. Maximum dryness was a priority — a cake moisture content of around 20% would be considered a good result.

Recommended Solution

Based on these requirements, we recommended the JXMGZ82/1000-30U membrane filter press, a unit well suited to fine-particle slurries where high cake dryness and effective washing are critical. Its key specifications are:

  • Number of chamber plates: 49 (including head and tail plates)
  • Plate size: 1000 × 1000 mm
  • Filter cloths: 48 sets
  • Filter cloth type: premium polypropylene (acid/alkali resistant) or premium polyester (acid resistant)
  • Filter cloth size: 1100 × 1100 mm
  • Number of chambers: 48
  • Chamber volume: approx. 1.2 m³
  • Filtration area: 82 m²
  • Equipped with a hydraulic system

The membrane design allows the cake to be squeezed after the initial filtration cycle, which is particularly effective for fine gold slurry — it drives out more liquid and helps achieve the low moisture content the customer was targeting. The chamber configuration also supports efficient cake washing, allowing the pregnant solution to be displaced from the cake before discharge.

Technical Follow-Up

After the initial proposal, we worked closely with the client on a series of detailed technical discussions to finalize the design — focusing primarily on the drawing design, the equipment operating method, and other application-specific details. This back-and-forth ensured the recommended unit was tailored to the actual operating conditions rather than relying on assumptions.

Delivered Equipment

The filter press was subsequently manufactured and delivered.
Image
Image

Interested in a Similar Solution?

If you are dealing with fine-particle slurries that require high cake dryness, effective washing, or continuous 24-hour operation, we would be glad to discuss your application. Contact us and we can provide detailed technical documentation, including process calculations, GA drawings, and equipment specifications tailored to your duty.

Get in Touch

Send us an inquiry and we will get back to you shortly.

Submission Successful!

Thank you for your message. Our sales team will contact you soon.

Something went wrong

The online form is temporarily unavailable. You can send your inquiry directly by email — your filled content will be included: